No products in the cart.
The DH512M is an uncoupling and waterproofing membrane designed to secure Ditra-Heat heating cable in place. Ditra-Heat provides uncoupling to neutralize shear stresses between the substrate and the tile covering to prevent cracked tile and grout. The cut-back stud structure of the Ditra-Heat membrane holds the heating cable in place without the use of clips or fasteners. It also eliminates the need for a self-leveling compound which minimizes the assembly thickness and allows for quicker installation. Prevents cracking and delaminating of the tiled surface Allows for easy installation of Ditra-Heat heating cables Quick and easy to install Made of polypropylene Roll dimensions are 3 ft. 2-5/8 in. width x 41 ft. 10-3/4 in. length Covers 134.5 sq. ft. Designed for use with Ditra-Heat heating cables Sold by the roll Membrane is 1/4 in. thick Installs with thinset Safeguard your walls and subfloors from water damage by selecting this Schluter Systems DitraHeat 25/ 103/ Uncoupling Membrane Roll.
- The stud structure of DITRA-HEAT is specifically designed to allow for the easy installation of DITRA-HEAT-E-HK heating cables
- Nominal 1/4″ 5.5 mm thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings
- Self-leveling compounds are not required to encapsulate the cables into the membrane
- Available by the roll or by the sheet to accommodate various room sizes
- Quick and easy to install and few tools are required