Tenino Copper Naphthenate 17% 2% As Metal 1 Gallon Wood Preservative

Tenino Copper Naphthenate EPA Reg. No. 64405-22-54471 Always read and follow all label directions. For Exterior Use Only! Tenino Copper Naphthenate contains 2% copper as metal as an oil-borne solution labeled for General Use. This ready-to-use solution in sturdy one gallon resealable jug provides coverage of 100 – 300sq ft. requires no mixing or dilution and may be applied by brush to almost any wood product needing protected from the elements. Treated wood will be protected from infestation of destroying organisms including subterranean termites drywood termites wood destroying beetles powderpost beetles carpenter ants and decay fungi. It may also be used to protect and prevent warping swelling shrinking and end checking caused by changes in moisture content of wood products rot mold mildew and moss. Tenino can be used for remedial or preventive treatment of standing wooden poles piling and other existing structures wooden and cellulose utility and construction products including: lumber end cuts timber rail ties posts poles freeway fencing siding boats piers docks boxes roofs shakes cedar shake roofs shingles porches steps fences rails beverage cases Tenino treated wood is suitable for ornamental or planting landscape timbers ties wooden seedling trays outdoor decor flower boxes and window boxes. Tenino meets the AWPA Standard M4 end-cut requirements for exterior and ground contact field treatments and should be used to fulfill requirements in IBC 2303.1.9 and IRC R317.1.1 whenever pressure treated lumber is cut or drilled. Tenino is best used to supplement pressure-treated preservative wood protection in aggressive hazard class environments envisioned in AWPA Use Category 44B4C.