No products in the cart.
SimPure High Quality Tankless Water Filter with RO UV System Really Worths Your Trying! Upgraded 8 Stage RO+UV Tankless Reverse Osmosis System 400 GPD High Flow Rate Tankless RO Design Unbelievable Efficiency 1.5:1 Low Pure to Drain Ratio TDS Reduction Nearly Zero Pre-membrane Pressure Detection: Filter Replacement Reminder Twist-in Filter Design Change Filters in 3 Seconds Note: You must fully turn on the faucet and flush the tankless RO system for 20 minutes after installation. With PP+CTO+T33+RO+UV 5-Stages water filtration it can remove up to 99.99% of Chlorides Chemicals Lead Hydrogen Sulfide fluoride Chloramines Heavy metals PFAS TDS pharmaceuticals microplastics Viruses Bacteria and 1000+ of other contaminants. This tankless RO system is also a BPA and Lead-free under cabinet reverse osmosis system. Tankless RO+UV Water Filter System Equipped with UV sterilizer this tankless ro water filter system is not only effective at removing bacteria like E. coli coliforms salmonella and a range of other viruses and water parasites. It effectively removes up to 99.99% of harmful microorganisms in water. Combined with 7-Stage RO Filtration System this tankless RO+UV water filter system will provide an extra level of purification for your drinking water compared with under cabinet reverse osmosis systems especially recommended for well water sources. Just buy one and taste the difference! Best Tankless Reverse Osmosis System for Under Sink With TDS Reduction Nearly Zero SimPure high-efficiency RO Filter removes contaminants 0.0001 microns or greater in diameter. This tankless ro water filter system is equipped with SimPure exclusive filtration technology so the TDS level of the tap water removal rate to 95% with a maximum rate of 99.99% which is the best reverse osmosis system for TDS Reduction. If the TDS of your tap water is between 0-200ppm the filtered water will be close to 0ppm. SimPure T1-400 can reduce the TDS of tap water with less than 200 PPM to near 0 PPM while the tap water with 200 – 500 PPM can reduce below 25 PPM or lower. This best tankless reverse osmosis system is also equipped with a high-precision water pressure gauge and 4 filters which are more efficient and last longer than similar products on the market. Tankless No Waiting Under Sink Design: Best Tankless Reverse Osmosis System This under sink tankless reverse osmosis water filtration system requires only a fraction of the space under the sink saving up to 70% undersink space. The SimPure T1-400 tankless RO water filter system offers a faster flow rate of 400GPD 0.28 gallons per minute supplying pure water instant on demand and no waiting. Theres no potential for secondary pollution either. RO systems with tank require at least 2-4 hours for the tank to fill before use and have to use an extra filter to remove any bacteria or microbiological contaminants that might have collected in the water while it was stored in the tank.. 400 GPD 1.5:1 Pure to Drain Ratio: A Real Sustainable Under Sink Tankless RO System SimPure T1-400 tankless under sink ro system equipped with a boost pump and offers faster water flow 400GPD 0.28 gallons per minute and can filter a cup of water in about 12 seconds. Compared to traditional RO systems SimPure tankless reverse osmosis system has a low pure to drain ratio of 1.5:1 Produces only 1 gallon of wastewater for every 1.5 gallons of pure water. This means you can reduce your own plastic waste C saving money on bottled water. Filter Replacement Alerts Twist-in Filter System Filters can be Changed in 3 Seconds SimPure T1-400 tankless ro water system is equipped with a water pressure gauge which reminds you to replace the filter more intelligently and scientifically without having to remember the date of the last filter change. And Compared to typical RO systems its unique Twist-in filter design avoids kinks and leaks making filter replacements a breeze and easy replacement in 3 seconds. Filter Replacement Reminder: If it is found that the water flow is small but the pressure value of the membrane is large the RO filter needs to be replaced. And if the water flow and membrane pressure values are found to be very small other filters need to be replaced