No products in the cart.
Complete with a high-efficiency charger two Power Cell LiPo batteries and Traxxas’ iD auto battery identification the Traxxas Battery Charger Completer Pack is everything you need to power your projects. Traxxas’ iD technology takes the hassle out of charging by automatically identifying and optimizing charger settings for any Traxxas iD equipped batteries. Charge up to two batteries either NiMH or LiPo at the same time with the high current connector or use Storage mode to prepare your LiPo batteries for extended storage. The Traxxas Battery Charger Completer Pack is the solution to all of your charging needs! Features: Charges 2S and 3S LiPo and 5-8 cell NiMH Batteries Capable of charging two batteries at the same time up to 50W 4amps or single battery at 100W 8amps. Engineered specifically to fit Traxxas models Traxxas’s iD technology automatically configures and optimizes charge settings for Traxxas iD equipped batteries. Storage Mode prepares LiPo batteries for extended storage Advanced mode for full control of charger setting.s Charges a NiMH and LiPo at the same time Progress bar and audible alerts New high current connector with gold-plated copper terminals and integrated balance connector MAXX cable high-efficiency 12 gauge silicone jacketed wire 30 Day limited warranty. Includes: 1x Traxxas EZ-Peak 100W Dual Battery Charger w/ AC Power Cord 2 x Power Cell 11.1V 5000mAh LiPo 3S Batteries w/ High Current Connectors and Integrated Balance Plugs 1x Instruction Manual Tech. Specs: Charger- Input Power: 100-240V/50-60Hz Charge Current: 1-4A Dual mode 5-8A High Output mode Discharge Current Range: 500mA Current Drain for Balance Ports: 500mA Weight: 20.3oz 575g. Dimensions: 7×5.4×2.2176x138x57mm. Batteries- Configuration: 3S1P Continuous Discharge: 25C 125A. Max Burst Rate: 50C 250A. Watt Hours: 55.5. Charge Rate: 1C 5A. Max Charge Rate: 2C 10A. Dimensions: 6.1×1.02×1.7155x26x44mm. Weight: 13.3oz 376g.