4 1.25″ 32mm 6×5 to 6×5.5 Wheel Adapters Changes Bolt Pattern 12×1.5 Studs 6×5 to 6×139.7

This Hubcentric – Wheel Adapter Kit Comes with Everything Needed Designed to Change Your Existing Bolt PatternSpecificationsVehicle Bolt Pattern: 6x5Wheel Bolt Pattern: 6×5.5Hub Bore: 73.1mm – Thread Pitch: 12×1.5Thickness: Each Spacer Measures 1.25inch Thick – Additional Information – Please ensure that the your vehicle has the same studs as the adapters otherwise additional lugs WILL BE required – Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening Failure to do so can result in damage to your vehicle – Installation needs to be performed by a trained professional It’s Possible that you OEM Studs are longer than the spacer is thick if so you have a few options:Your lugs studs will need to be shortened by grinding them down – You can replace your studs will shorter studsif you wheels have cavities in the backside between the mounting holes then you should be OK will need to make sure flushALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS