No products in the cart.
Facet fuel pumps have low power requirements about 1 amp at 12 volts and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pumps are compatible with gasoline alcohol blends up to and including E85 diesel biodiesel and fuel additives. Maximum pressure 4 to 7 psi. Typical flow 15 gallons per hour at 3 psi. This pump has a built-in check valve to ensure that fuel can only flow in one direction. It has no anti-siphon valve so fuel can be pulled through when the pump is off. The negative lead has a ring connector installed. The positive lead has no connector. 60dry lift rating. Facet part number 40109 supercedes Facet number 40023. This pump can also replace Facet pump number 40137. All specifications are the same but the 40137 has a Packard connector on the positive wire which this pump does not. Beware of counterfeits! Facet pumps are still Made in the USA. Not sure if this is the pump you need