Armor WL550 1 Gal Matte Wet Look Sealer for Concrete Brick Pavers and Stone

Will darken the surface of unsealed concrete brick pavers stone slate and porous masonry to make it look wet Will NOT leave behind a surface film works entirely below the surface Water repellent characteristics help to reduce deterioration caused by water absorption and freeze-thaw cycles Will last for up to 3-5 years before the need to reseal Breathable low VOC single coat application. The Armor WL550 Enhancer Sealer PRO is a solvent-based silicone water repellent sealer that will protect the surface from damage and deterioration caused by water absorption and enhance it with a matte wet look finish. The WL550 Enhance Sealer PRO works entirely below the surface and will not leave behind a visible surface film. The WL550 is designed specifically for unsealed concrete brick pavers and natural stone where a color enhancement is desired. The Armor WL550 is designed for UNSEALED concrete brick dense pavers flagstone aggregate and natural stone. 1 Gallon will cover up to 175 FT2 in one coat. Coverage will vary depending on porosity. Actual level of enhancement will depend on several factors including surface type and porosity. Overly porous concrete or paver surfaces should instead be sealed with the Armor AR350 wet look sealer for a deeper enhancement.