Grizzly Spiral Cutterhead for 13″ DeWalt Planer.

T32591 Spiral Cutterhead for 13DeWalt Planers Upgrade the cutterhead to improve the finish of your planer. The T32591 13Spiral Cutterhead is designed to replace the straight-knife cutterhead on the DeWalt DW735 and DW735X T22222 Planers. This cutterhead takes the performance of your planer to the next level and cuts smoothly through your planing projects with ease while reducing tearout more effectively than conventional straight-knife cutterheads. With the cutting edges of the 30 carbide inserts produce a superior finish even in highly-figured wood. The indexable carbide inserts are less prone to nicks and cracks over conventional HSS knives. If an insert dulls or gets nicked simply rotate it to expose a new sharp edge. No need to take out all the blades for sharpening or replacement like before this upgrade. Once all the edges on an insert have been dulled the individual inserts are easily replaced with a few turns of a hex wrench. With the T32591 Spiral Cutterhead the carbide inserts are staggered around the head so only one or two inserts are in contact with the workpiece at any time. New replacement bearings are included with the T32591. The T32591 instruction sheet was written by our U.S. based Technical Documentation Department and is packed with useful information. SPECIFICATIONS: Maximum width of cut: 13Cutterhead diameter: 1-7/8Number of rows: 3 Number of inserts: 30 INCLUDES: Fresh set of bearings T-25 T-handle wrench Five additional inserts and Torx screws