No products in the cart.
This floor box kit is tamper and weather resistant with two 20 amp tamper resistant outlets. It comes with a watertight and corrosion resistant gasket to ensure a long life and reliable performance. The junction box included in this floor box kit is made out of pre galvanized steel and has 10 pre-cut knockouts for dynamic wiring: 2 knockouts on each side of the box along with an additional 2 on the bottom. Then just pull up on the respective receptacle window. Closing it is just as easy just push down on the windows and turn the center lock back to its original position. This floor box kit is designed for uses such as tile hard wood and carpet flooring applications and also is great for marble and granite counter tops. The brass finish of the cover makes this a great choice for any dark colored carpets desks or even production stages as it gives you the functionality you need while adding a nice contrast to the ground or counter. The floor box cover in this kit has been treated by polishing passivation and painting to keep it looking clean and new. To open this floor box simply insert a small coin or flat head screwdriver into the locking center piece then turn until both receptacle windows are released. Floor boxes are a great idea for any home improvement project as it not only increases the value of it but also adds a modern touch to any room. Manufactured in an ISO9001 registered manufacturing facility. UL Listed.