No products in the cart.
The Mini Iso-Brick Power Supply supplies quiet noise-free DC power to wide range of pedal types while taking up less space than a candy bar. Whether you need a space-saving solution for your downsized travel board or you just need to power a small carefully curated selection of tried-and-true staples this little box has what you need. First lets talk outputs. The Mini Iso-Brick Power Supply has five and each is fully isolated to eliminate obnoxious gig-ending ground loop noise. Four of the outputs supply 9 volts of power at 300mA while a fifth can be set to provide either 9 volts or 18 volts at 800mA depending on your needs. With a generous amount of current on tap and the ability to handle both negative and positive grounds these outputs will accommodate almost any pedal analog or digital. And dont let the five outputs restrict youif you need to add an extra pedal the Mini Iso-Brick Power Supply has you covered. It comes with a splitter cable that can be used to connect two pedals to a single output provided they require the same voltage and you dont exceed the outputs current rating. You can do this with all of the outputs simultaneouslyjust purchase the extra cables to do so. Finally troubleshooting can be a hassle on dark stages so the Mini Iso-Brick Power Supply comes equipped with LEDs to let you know that all your connections are solid. Combine that with a lightweight housing that’s built like a tank and you can step on stage with confidence that your pedalboard will stay powered from gig to gig.