Golden Age Pre-Wired Harness for Gibson Les Paul with Push-Pull Pots with Long-Shaft CTS Pots

This prewired harness will SAVE YOU TIME and make your Gibson Les Paul more versatile! Our pre-wired harness with push-pull pots splits the coils of humbuckers for single-coil operation. For humbucking pickups with series link access 3 wire 5 wire etc. Golden Age harnesses are assembled and soldered in the USA using top components including Switchcraft switches and CTS pots for the best sound. Ready to drop into your guitar! Some simple soldering is needed to connect the switch and jack after you’ve threaded the wires through the guitar channels. Pickup lead wires will also need to be soldered to the harness. What’s included: Installation instructions 1 – reusable plywood template 1 – Switchcraft toggle switch with amber knob 4 – 500K CTS control pots 2 regular 2 push-pull; knobs NOT included 2 – Orange Drop capacitors 1 – Switchcraft output jack Components are prewired using cloth-covered push-back wire TECHNICAL SPECIFICATIONS: Switchcraft Toggle Switch Body cavity depth required: 1-1/2 inch 38.10mm Mounting hole diameter: 1/2 inch 12.70mm Thread height: 7/32 inch 5.56mm CTS Control Pot Resistance: 500K-ohm Shaft diameter: 0.235 inch 5.95mm split shaft fine knurling 24 splines Thread: 3/8 inch x 32 Threaded portion height long shaft: 3/4 inch 19.05mm Mounting hole diameter: 3/8 inch 9.52mm Required cavity depth: 1-3/16 inch 30.16mm Orange Drop Capacitor Value: .022uF Code 223K Switchcraft Output Jack Accepts standard 1/4 inch plug; Mono Mounting hole diameter: 3/8 inch 9.52mm Thread: 3/8 inch x 32 Threaded portion height: 1/4 inch 6.35mm