No products in the cart.
This prewired harness will SAVE YOU TIME and work on new builds. Likewise it’s a QUICK AND EASY way to upgrade your old wiring with premium components. Each Golden Age harness comes to you mounted on a reusable plywood template which is a tool in itself: save it for future wiring jobs. The template holds the components correctly so the finished harness fits neatly into the guitar’s wiring cavity. Some simple soldering is needed to connect the switch and jack after you’ve threaded the wires through the guitar channels. Pickup lead wires will also need to be soldered to the harness. What’s included: Installation instructions 1 – reusable plywood template 1 – Switchcraft toggle switch with amber knob 4 – 500K CTS control pots knobs NOT included 2 – Orange Drop capacitors 1 – Switchcraft output jack Components are prewired using cloth-covered push-back wire TECHNICAL SPECIFICATIONS: Switchcraft Toggle Switch Body cavity depth required: 1-1/2 inch 38.10mm Mounting hole diameter: 1/2 inch 12.70mm Thread height: 7/32 inch 5.56mm CTS Control Pot Resistance: 500K-ohm Shaft diameter: 0.235 inch 5.95mm split shaft fine knurling 24 splines Thread: 3/8 inch x 32 Threaded portion height: 3/8 inch 9.52mm Mounting hole diameter: 3/8 inch 9.52mm Orange Drop Capacitor Value: .022uF Code 223K Switchcraft Output Jack Accepts standard 1/4 inch plug; Mono Mounting hole diameter: 3/8 inch 9.52mm Thread: 3/8 inch x 32 Threaded portion height: 1/4 inch 6.35mm