No products in the cart.
This prewired harness will SAVE YOU TIME and work on new builds. Likewise it’s a QUICK AND EASY way to upgrade your old wiring with premium components. Each Golden Age harness comes to you mounted on a reusable plywood template which is a tool in itself: save it for future wiring jobs. The template holds the components correctly so the finished harness fits neatly into the guitar’s wiring cavity. You simply solder the jack and your pickup lead wires to the harness. What’s included: Installation instructions 1 – reusable plywood template 1 – 3-way CRL Switch with 1 black barrel knob 1 black top-hat knob 2 – 250K CTS control pots knobs NOT included 2 – Orange Drop capacitors 1 – Switchcraft output jack Components are prewired using cloth-covered push-back wire TECHNICAL SPECIFICATIONS: 3-way CRL Switch Body cavity depth required: 1-3/8 inch 34.93mm Mounting screw spacing: 1-5/8 inch 41.28mm Lever stem: .052 inch x .188 inch 1.32mm x 4.78mm Pickguard slot required: 1/16 inch x 1-1/16 inch 1.59mm x 26.99mm CTS Control Pot Resistance: 250K-ohm Shaft diameter: 1/4 inch 6.35mm solid shaft requires a set-screw knob Thread: 3/8 inch x 32 Threaded portion height: 3/8 inch 9.52mm Mounting hole diameter: 3/8 inch 9.52mm Orange Drop Capacitor Value: .047uF Code 473K Value: .001uF Code 102K Switchcraft Output Jack Accepts standard 1/4 inch plug; Mono Mounting hole diameter: 3/8 inch 9.52mm Thread: 3/8 inch x 32 Threaded portion height: 1/4 inch 6.35mm