No products in the cart.
MAS Deep Pour Epoxy is specifically designed for molding encapsulating and creating deep pour castings such as those used on live edge river tables and ocean tables. It cures slowly to a clear glass-like finish that resists scratching and yellowing. The extended gel time minimizes exotherm and improves air release for the clearest possible results. For ocean and river tables MAS Deep Pour is the epoxy resin to reach for. Features: Maximum casting thickness per pour is 1/2” to 1” at 70 F subject to multiple variables consult the instructions for more infoThicker castings can be achieved with multiple poursImproved air release for minimal air bubblesCan be sanded and machined after 24-48 hours Two-component system composed of 100% solids with a 3: 1 by volume mix ratio IMPORTANT NOTE: This is an advanced deep pour epoxy resin system. DO NOT use Deep Pour Resin in working temperatures above 75#176;F. Pouring too much epoxy into a large area may result in shrinking yellowing or cracking. Prior to using Deep Pour Epoxy it is recommended that you seal any wood or porous surfaces with Penetrating Epoxy Sealer #60727 sold separately. This will reduce the risk of air bubbles and foam during cure.