No products in the cart.
BYPASS OPTIONS MADE AVAILABLE ON ONE TRACK. It is never an easy job to install a double track bypass kit. Sometimes the clearance you have is not enough sometimes the gap between the two doors is too large and sometimes it is just frustrating to put all the pieces together. Now with our single track bypass option installing a bypass kit has never been easier. You can just follow the steps for a standard double door kit and replace the regular hangers with the bending ones. NOT ENOUGH SPACE NOT A PROBLEM! Ever frustrated that the ordinary bypass hardware taking too much space with its bulky appearance It only requires 6 inches clearance and if you are short in the room between the top of the door to the ceiling the single track bypass will be a perfect choice. QUALITY IS 100% UNDER CONTROL. The black powdered coating makes the paint stay forever and will not be scratched off. The wheels of the roller are made of high-quality nylon which ensures minimal noise when it glides on the track. Each complete track can hold door weight up to 220 lbs. BARN DOOR HARDWARE INSTALLATION MADE EASY. I understand it is stressful and time consuming to mount the double track bypass because you have to level the two flat tracks correctly and complex installation for the bypass doors. So do I! Homacer single track bypass allows your beautiful barn doors to slide bypass with each other on JUST ONE TRACK.You will also receive the step by step instructions with fractional measurements and concise word instructions with pictures. MONEY AND TIME SAVER FOR YOUR PROJECT. Tired of spending hell lot of money and time when searching for the proper size and type of hardware at the big box store Not the case here! No more hassle to go back and forth for the missing or replacement parts. br HOMACER aims to provide the best value products and services to save your time and money when you think of installing a sliding door at your home! br br Pre-install Notice: /b br br 1. The hardware package only has lag bolts for wooden wall or drywall. br br 3. Our sliding barn door hardware kit is compatible with door thickness from 1 3/8 inches to 1 3/4 inches. The spacer extension will extend the track further from the wall to fit the thicker door. br br 4. If you have a door trim youd better put a header board that is as thick as the trim and then attach the hardware to the header board. br br 5. From the top of the door to the ceiling you need to have at least 6 Inches clearance for the single track bypass hardware kit. br br 6. All tracks that are 7.5FT and under come in one piece. All tracks that are 8FT and above are connected by two tracks using a junction plate. Thus the spacing between the middle two holes may not be 16 inches. The 18FT track is connected by three 6FT tracks and the 20FT track is connected by three 6.6FT track.