No products in the cart.
Riser Rated Ethernet Cable The CMR jacket is for use in between floors in wall and non-plenum spaces. Helps prevent fires from spreading floor to floor in vertical installations with mild flame retardance. Ultimate Performance Suitable for 1 Gigabit and 10-Gigabit Ethernet speeds up to 328 feet. Bandwidth tested up to 750 MHz. Overall Foil Shield – F/UTP. The overall aluminum foil shield helps eliminate cross-talk and prevents electromagnetic interference otherwise known as EMI. Supports Power over Ethernet: PoE/PoE+/PoE++ IEEE 802.3af/at/bt 4PPoE up to 100W. Sequential footage markings every 2 feet improve efficiency and easily allow you to track how much cable is left on the EZ Pull Reel. Internal spline adds strength fights against kinks and further separates pairs for a cleaner signal. Compatibility Counts Terminate with shielded Cat6A RJ45 connectors compatible with 23AWG solid conductors with an insulated conductor diameter of 1.10mm and an overall cable jacket diameter of 7.40mm. Pure Solid Bare Copper Conductors Complies with UL ANSI/TIA and U.S. product safety standards. Bare copper is superior conductor material for data transmission and PoE use. The only industry and governmental approved type of conductor for use in Ethernet networks. CERTIFIED by trueCABLE Our data cables have been tested with a Fluke DSX-8000 Versiv CableAnalyzer and are in compliance with ANSI/TIA 568.2-D standards RoHS-3 compliant and cETLus certified.