No products in the cart.
Suitable for use with condensate from air conditioning applications. 22ft of lift compared to the typical 20ft. Features include vibration dampening feet and motor mounts metal hang tabs four inlet holes a clear indicator display a float switch and check valve. Integrating the CP-22 into your system is easy. 1/4in. quick connect terminals provide easy connection to the built in overflow switch. Two Safety Switch terminals are provided to provide system shut-down as needed. Rated Voltage 120 Volts/60Hz Rated Current Draw 1.9 Amps Head Height 22 ft. maximum Flow Rate at Zero Head 1.6 GPM Product Weight 5 lbs. 4.7 lbs. low profile Inlet Height from Base 4.41.75low profile Vibration Isolation The elastomeric motor mounting gasket dampens vibration. Indicator Lights The red yellow and green indicator lights show the pump status. The green shows the power applied to the pump yellow shows the pump is running and red is for high level alarm. Rubber Feet The rubber feet that support the CP-22 Condensate pump help to dampen vibration which reduces noise. Four Inlet Holes The four inlet versus two or three on other pumps provide the greatest installation versatility. Inlet holes have a reinforced wall for durability. Removable Check Valve The CP-22 Condensate Pump features a removable check valve which allows for hassle free cleaning. Overflow Safety Switch The 1/4quick connect terminals provide easy connection to the built-in overflow switch. Two terminals are provided allowing the installer flexibility to connect the air handler shut-down. The switch features SPDT isolated contacts ready for connection to building automation systems. Metal Hang Tabs The CP-22 Condensate Pump comes equipped with shatterproof stainless steel hang tabs which have hole-and-slot design for easy mounting. The tabs are located on convenient 8centers.