No products in the cart.
This kit makes it easy to order premium components for wiring your SG or similar thin-solidbody 4-control / 2-pickup guitar with a 3-way switch. Complete with wiring diagram this kit features trusted components used for decades in Gibson and other iconic American instruments such as Switchcraft toggle switch and jack CTS potentiometers Orange Drop capacitors and cloth-covered push-back wire. Be sure your control knobs will fit: CTS pots in this kit have fine-knurled 24-spline split shafts. Coarse-knurled knobs for imported Alpha pots won’t fit. Premium Wiring Kit for Gibson SG includes: 1/4 inch Switchcraft long-thread output jack 1 500K-ohm CTS control pots 4 .022uF Orange Drop capacitors 2 Switchcraft 3-way right-angle switch 1 Amber switch knob 1 Non-shielded cloth-insulated push-back circuit wire: 22 AWG white 12 inch long Non-shielded cloth-insulated push-back circuit wire: 22 AWG black 24 inch long Shielded braided push-back circuit wire: 22 AWG 12 inch long Wiring diagram CTS control pot specifications: Shaft diameter: 0.235 inch 5.95mm split shaft fine knurling Thread: 3/8 inch x 32 Thread height: 3/8 inch 9.52mm Required mounting hole diameter: 3/8 inch 9.52mm Switchcraft 3-way right-angle switch specifications: Switch length: 2 inch 50.80mm Body cavity depth required: 13/16 inch 20.64mm Mounting hole diameter: 1/2 inch 12.70mm Thread height: 3/16 inch 4.76mm NOTE: Requires at least 1-3/4 inch 44.45mm from the center of the mounting hole to the edge of the control cavity for wiring clearance