No products in the cart.
1. Effectively Stop 3d Printing Fume Or Odor Affect Your Nose And Health ! The enclosure with excellent airtight performance can insulate the smell emit from 3d printer resin or melted filament in time then extract the smelly air out quickly by ventilation system.No more nasty fumes in the working room! 2. Enhanced Warming AffectContribute To Better Printing Quality And High Success Rate.When Print ender-3 with ABS filament nozzle 240Cbed 110C room temp.27C20-30 min. later interior temp. could go to 41-42C with this constant temp. print object not easy wrap on bottom or crack between layers ; print an epax 10.1 inch mono LCD printer at room temp.27C enclosure can go up to 33-35C which means allow resin flow faster especially in cold daysthis enclosure will help to print better 3. Multifunctional Usage. Excellent warming affect with exhaust fan make the enclosure to have unexpected Dryer function when test ender 3 to print ABS filament the inner humidity is 65% 20 minutes later interior humidity drop to 34%with exhaust fan on for long timehumidity would low to 26%. This enclosure also could be a Dust Cover Waterproof Tent UV light shelter and can reduce working noise. 4. Easy to install Convenient to Use . Assemble the enclosure just like a simple tent; with lighting bar and observation window easy to watch printing progress; the window made of dark transparent materialall zippers are air tighten so allow LCD printer working without acrylic cover and allow resin inside without been cured for long time storage; both side with exhaust fan seatfree to arrange extract direction according to need; also with valve to avoid insect come into room from the vent. 5:Wide Compatibility . Packing listSmall Enclosure body *1 Stainless steel enclosure shelf kit*1 Ventilation kit*1 User manual *1 User tips 1 When assemble the Fan please make sure all the holes are well matched!