No products in the cart.
Whether you have a permanent installation or mobile this snake cable is rugged enough to handle whatever you throw at it – road ready and built to last. The quality of your sound can only be as good as the connections between the stage and the mixer and with this snake cable each pair of heavy duty conductors is individually shielded yielding crystal clear sound while rejecting extraneous noise. XLR connectors make this snake cable fit right in with professional power amps and mixing consoles without the need for converters or couplers. These snakes are your basic hardwired Y splitters. They each have a stage box and two hardwired short trunks with fantails. These splitter snake cables do not have splitter transformers ground-lift switches or multi-pin disconnects. These splitter cables are straight send snakes and do not have any returns. The cable ends on the fantails are all male XLR while the stage box consists of all female XLR and 1/4 inch combo jacks. You can plug an XLR or a 1/4 inch in to the box end of the snake. Each stage box is well labeled and constructed from heavy duty steel. The Stage Box is rack mountable for convenience and ease of trasport. Both fantails are well labeled and grouped by color. Both the main trunk and split trunk are built with cable that is individually shielded pairs 22 guage high copper purity conductors with aluminum foil shield and trace wire. You will find strain relief at both the stage box and fantail end of the snake. There is a mesh hanger at the fantail end. The female XLR / 1/4 inch panel jacks on the box are locking coiled spring style with non metallic bodies. The fantail is built with male XLR shells. So put it in your cart today and get ready for years of trouble-free crystal clear sound!