No products in the cart.
This display only supports the Raspberry Pi DSI interface and the Raspberry Pi can be easily installed on the back of the monitor through 4 positioning holes. The display provides power to the Raspberry Pi through the power adapter board and the two XH2.54 sockets can supply power to fans or other peripherals. DSI interface 7-inch LCD 800×480 resolution and 5-point capacitive touch screen display brightness can be adjusted by potentiometer and software PWM integrated audio amplifier and 2W dual channel stereo speakers and volume potentiometer. Reserve an SSD adapter PCB mounting location for running Raspbain directly from a USB3.0 SSD or as a high-speed mass storage device as a media library for NAS or Volumio. Integrated with CH340E chip and DB9 male header RS232 or RS485 function can be selected by DIP switch. The TXD/RXD signal has LED indicators to show the communication process of sending and receiving. Can be connected to PLC stepper/servo drive LORA module… The display is equipped with 2 damping shaft brackets the display angle can be adjusted arbitrarily and the brackets can also be removed to install the case. The STL file for the 3D printed case is available under eleclab-rpi/7INCH_DSI_DISPLAY and the fan case STL file is under eleclab-rpi/rpi_fan_case.