No products in the cart.
The Behringer Powerplay 16 P16-D 16-Channel Digital Ultranet Distributor extends and expands the POWERPLAY P16 personal monitor system by duplicating a single low-latency percent3C 0.9 ms 16-channel 24- bit Ultranet signal into 8 identical digital outputs. These 8 cloned digital signals can then each be sent to a P16-M personal mixer or other Ultranet device. Each P16-D Ultranet Distributor receives the Ultranet signal through a single CAT5e RJ-45 input jack. The P16-D then clones the Ultranet signal and sends 8 copies back out through the unit’s 8 Ultranet RJ-45 output jacks. In addition to the Ultranet 16-channel digital signal each P16-D also sends out a power signal through each Ultranet output. When power outlets are scarce each of these bus-power signals can be used to power a P16-M mixer. Each of these P16-M mixers then allows each user to create their own personal customized headphone or monitor mix. Within a large Ultranet network originating from a P16-I Input Module the P16-I Input Module can send out 6 identical Ultranet signals each with 16 channels of 24-bit audio to 6 P16-D hubs. Each P16-D hub in turn distributes 8 copies of the same 16-channel digital signal to 8 P16-M Digital Mixers for a total of 48 P16-M mixers. The P16-D also seamlessly integrates with the x32 digital mixer. The x32’s single Ultranet output signal can be sent to a single P16-D hub for further distribution to P16-M mixers or additional P16-D distribution hubs. As part of an Ultranet network the P16-D supports a complete personal monitoring solution for live studio or installed sound applications.