No products in the cart.
All About Your CH-MIC70: How To Setup Your CH-MIC70: What’s in the Box: Microphone 30 Foot to cable Description: The CH-MIC70 is a push to talk gooseneck condenser paging microphone with built in chimes designed for commercial applications. It has a built in mic preamp to ensure it gets a strong and clear signal without distortion. It also does not require 48V phantom power because it has the pre-amp built in! Simply plug this into either a line level or mic level input of your mixer or receiver and you are good to go. This mic was designed by Rockville and works in the following way: 1. When you want to talk into the mic and make an announcement it will make a chime in sound and then you can make your announcement. 2. When you are done with your announcement you hit the mic out button and it will make a chime out sound and the mic will be muted. You can turn the chime off by lowering the chime volume to 0. This mic has a great frequency range and great sound quality. Most people use it for announcements and speeches but you can even sing into the mic it will sound great. This mic has a flexible gooseneck making it perfect for conference rooms churches schools restaurants and other commercial applications. Lastly the included pop filter enhances the signal by reducing the amplitude of the plosives in the speech making the output clean and balanced. Features: Rockville CH-MIC70 Push To Talk Commercial Gooseneck Microphone With Built-in Chimes Push mic in button to talk mic will make a chime in sound Push mic out button to stop talking Mic will make a chime out sound Chime volume control Turn chime volume to 0 to turn chime off Condenser mic with built in mic pre-amp so this does not require 48V phantom power Simply plug the mic into any mic input or line level input 1/4 output jack Flexible gooseneck stand Pop-filter included 30 ft. 1/4 cable included AC Powered 110v/60Hz Dimensions: 3.82 x 6.22 x 18.7 Weight: 1.32 lbs Specifications: Transduction method : Electret